gorgets-msg - 5/17/96 Gorgets. Neck protection for SCA combat. NOTE: See also the files: chainmail-msg, armor-msg, shields-msg, weapons-msg, armor-leather-msg, armor-plastic-msg, armorers-lst, coat-of-plates-msg. ************************************************************************ NOTICE - This file is a collection of various messages having a common theme that I have collected from my reading of the various computer networks. Some messages date back to 1989, some may be as recent as yesterday. This file is part of a collection of files called Stefan's Florilegium. These files are available on the Internet at: http://www.florilegium.org I have done a limited amount of editing. Messages having to do with separate topics were sometimes split into different files and sometimes extraneous information was removed. For instance, the message IDs were removed to save space and remove clutter. The comments made in these messages are not necessarily my viewpoints. I make no claims as to the accuracy of the information given by the individual authors. Please respect the time and efforts of those who have written these messages. The copyright status of these messages is unclear at this time. If information is published from these messages, please give credit to the originator(s). Thank you, Mark S. Harris AKA: THLord Stefan li Rous Stefan at florilegium.org ************************************************************************ Newsgroups: rec.org.sca From: John Gahrmann Subject: Re: Comfortable Gorget?!?! Date: Wed, 11 Oct 1995 17:48:05 GMT I have worn a steel gorget for years. My solution (and I recommend it!) is to have a gambeson (padded coat) made with a high padded collar that the gorget can fasten around. This has proven to be very comfortable, more so than the average necktie :) anyway... another alternative might be a fighting tunic with only the neckline padded. Just be sure the padding extends above the steel. From: rorice at nickel.ucs.indiana.edu (rosalyn rice) Newsgroups: rec.org.sca Subject: Re: Comfortable Gorget?!?! Date: 10 Oct 1995 16:16:16 GMT Organization: Indiana University, Bloomington The gorget should either be tight enough that it moves with your neck or loose enough that your neck can swivel inside it without rubbing against the material. Dog collar gorgets are almost never comfortable since they rub and trap sweat. A better pattern is the steel gorget lined with foam. Not only does it give better throat and C1-3 protection it also "breathes" better and doesn't go moldy if you get it wet and leave it in a hot car trunk for a week. Most armorers sell them, and anyone can make one (mine was my first piece of armor ever. It isn't gorgeous, but it's not bad.) In profile most will look sort of like this: ----------------------- / | \ / ------|----- \ | --------/ \--------\ There will be a slight scoop for the shoulder, and a slight bulge in back for the cervical vertebrae, and the rear will also have a slightly steeper angle to better fit the slope of the back of the neck. Lothar Edited by Mark S. Harris gorgets-msg Page 2 of 2